Fin Product Area

Is it possible to integrate intercom live chat with a React.js website?

How can I have different partners each have a widget and then tag each distribution endpoint as a tag so I know where volumes are coming from per widget?Example:Brand Apple Brand OrangeBoth use an intercom widget with our company, when the message is sent in, I want to be able to identify which brand I am getting the message from, Apple or Orange. Thank you for the help!

Hi all, when in light mode with the new Intercom UI, there doesn’t seem to be a clear differentiation for the description section of Customer Tickets  -- is there any way this could be a bit more distinct?

Can workflows in Intercom handle conditional branching? I'm looking to create workflows that adapt based on user behavior or attributes. For example checkout, if a user clicks a specific link, they should receive one message, but if they don't, a follow-up should be sent instead. Does Intercom support this kind of dynamic flow? If yes, how can I set it up effectively? Any tips or best practices for conditional workflows would be appreciated!

I’m finding that the inconsistency in the notifications is making them unreliable. Apparently, even when the notifications setting is on, we receive notifications only when we’re not “active”. Since I have the Intercom tab open all day, I go in and check the income messages a few times a day but I would still like to receive a notification whenever a ticket has been assigned to me or whenever I am mentioned (hence my notifications setting) so that I don’t make “our customer” wait a while to be answered. Is there anyway I could receive notifications for all my mentions and assigned tickets regardless of my status (active or not)? Thank you

Hi,is there a way to add opening text in a collection bfore the part that addresses to the articles in it? For example to add it in the pink form as shown in the screenshot attached  Best regards,Milena

Hello, As soon as one of our customers creates a new ticket from a tablet or ipad, it does not follow the usual workflow and therefore arrives unassigned. How can we rectify this? Thanks 

How does everyone set up their intercom inboxes and assignment rules when you have to support customers in different time zones? We are trying to assign tickets to our support folks from customers ONLY during the times we are 'contractually' obliged to For example, if a customer is located in APAC and opens a ticket during non-APAC hours, we want that ticket to 'stay' in the inbox and get assigned to anyone. However, we want the other inboxes to still auto-assign tickets to people who are 'active.' Is this possible? We don't have dedicated team members for each inbox, but the same team works on multiple inboxes.

HiI notice that constantly competitors are using services to attack bots on my personal blog. How to block them correctly?I use disavow on google. What else can I do?https://parksidedentalny.com/

Sometimes our site is attacked by bots, what can be done in this situation? How to prevent unwanted visitor bots?our domain: https://parksidedentalny.com/

Intercom's API only allows me to select either the Plain or Personal templates when sending an email through the API, is there any way to send these messages using full HTML?

Hi,I have two questions. 1. How can I disable Intercom on the mobile version of my website? 2. How can I enable Intercom to defer load only on my website - Prediko.io so that it doesn’t impact with Page perfomance loading timeTIA! 

Hi team, I am a new developer, and I need your help.I have a website for users with domain app.xxx.com, and a support website with articles support.xxx.com. I am setting my page articles to private access, so if the user is not logged in, they will see the message "Unable to load this article, you may need to sign in first" with the button url.I am looking for a way that after clicking the button url, it redirects from page support.xxx.com/en/articles/yyy to our login page app.xxx.com, after login it redirects back to the page articles support.xxx.com/en/articles/yyy. i can do that if i add query return_to = support.xxx.com/en/articles/yyy. But each page will have a different url, is there a way i can get the current url address and set it to the button url?

Hello Team,Have you had reported issues where the Responsiveness report has incomplete data points?I posted this also in chat and still waiting feedback.We want to verify if this is an instance\setting issue we can tweak or is general for all Intercom users. I would like to ask if this 

I just signed up for Intercom, and am having some issues.Within my own intercom dashboard, when I click the chat/messenger button to get help from Intercom itself, the chat window appears to try to open and then promptly disappears. Watch this screen capture. Not a good first impression if I can’t even get customer support from a customer support company. Ha.   With my own site integration, when i visit it (even from a separate computer) I get the attached screenshotted window when i click the messenger button, as a visitor. Everything is setup as correctly as I can figure. Any idea why the full welcome / start a conversation options don’t exist? Website is www.lumatone.ioThanks.Matt 

Hi everyone!If you are using FIN as the chatbot, I’m curious about what is the current CSAT score of your FIN profile. Ours is currently ~50%, and we are not really sure if it’s a good one. Thanks!

In certain situations, we may need to focus specifically on the data from a single column in a chart. Rather than adjusting all the chart filters to isolate that column, it is more efficient to perform a drill-down on just that column.  

I have two workflows:1. One triggered by a whatsapp conversation (Customer sends their first message), where the final step is Wait 23 hours: If anyone sends a message during this time, the workflow will end.2. Another triggered by Customer sends any message (for various sources, including whatsapp).It is happening that after the customer answers the first workflow during the wait (so the workflow ends), and then sends another message, the second workflow is not being triggered.It is very weird because this same system works for other workflows triggered from messenger.¿Is there a reason why the second workflow is not being triggered?

I am experiencing an issue with the iOS version of the application. All audio files that are sent via conversation are unviewable and undownloadable due to an indefinite loading state. Is there a way to resolve this problem?

Hello,I have a requirement to assign the conversation to the teammate who replied last OR add this teammate to the list of Assignees.I am wondering if there is a simple way to implement using Intercom workflows rather than API approach.In the ‘Teammate sends any message’ trigger I am not able to find a dynamic option (current user)

I am a new Intercom user. When building my first email, I ran into a few issues - so hoping someone can assist. Trying to reduce the font size of a sentence in a Text Box. When I highlight just the sentence I want to be smaller font - it changes the entire text box, not just the highlighted text. I am trying to insert an Icon/Image to the Left of a bulleted list. Unfortunately I can’t figure out how to have two columns - so it is only allowing me to insert the image above or below the text.  Lastly, I am trying to add a few design elements - such as a horizontal line as an accent, not a divider. I haven’t found how to do that. Any guidance or tips for this novice user, would be greatly appreciated!SD

Curious if anyone has dealt with this issue. In the image below you can see that Tyson replied to a customer, however it’s showing the wrong contact image in Gmail. We have intercom set to send all responses from support@ourdomain.com. I’m assuming this is more of a Gmail issue than an Intercom issue, but I just want to figure out if there’s something I can do to prevent this from happening.  

I’m initiating a new conversation *to* a Contact, by using `createmessage` with the flag `create_conversation_without_contact_reply`. I get back a `conversation_id` on the resulting `Message` object. I then attempt to tag the conversation using `attachtagtoconversation`, which returns a very unhelpful message:{"type":"error.list","request_id":"00038sjjl7b2cb36su6g","errors":[{"code":"unsupported","message":"Conversation has no taggable part"}]} What does this mean? How do I apply tags on conversations? EDIT: this seems to happen when trying to tag newly-created tickets, too! the error message mentioning “Conversation” threw me off.

Hello, we are facing an issue with article url.When we are trying to reach this one for example https://help.studentpop.fr/fr/articles/5478884there's a redirection to http://help.studentpop.fr/fr/articles/5478884-pass-sanitaire. Actually our apps only allow https url so the redirection does not work. We saw that there is a parameter on help center -> settings -> Set up the basics -> security protocol, but even if we turned it into "https" we are still redirected to the "http" url.Is there a way to fix it ? Thank you